Description
Price: $17.99 – $11.31
(as of Oct 30, 2024 02:36:53 UTC – Details)
These compact, lightweight fence clamps allow you to secure a wide variety of shop-made auxiliary fences to your existing fences without the clamp getting in the way. The clamp arm simply fits into a 3/8″ hole in the top of the auxiliary fence, preventing interference while you work. Clamps can be used in pairs for sacrificial fences, half-fences, resew fences, singly as Stop blocks and many more fixtures. Includes 2 clamps, which is all you will need! Material: Aluminum and steel
UNIVERSAL FIT: Fits into a 3/8” hole in the top of the auxiliary fence
PREMIUM FUNCTIONALITY: Range of travel 1/2″-5-3/4″ (12mm to 146mm)
PPLICATIONS: Use as stop blocks, sacrificial fences and resaw fences
PREMIUM MILESCRAFT TOOLS: Lightweight, rugged material with TPE clamp Pad
INCLUDES: Two Universal Fence Clamps
Customers say
Customers like the functionality, build quality, and value of the product. They mention it provides best results, is well-made, and is a simple fastening tool. Some also like the adjustability. However, some dislike the angle tension and thread quality. Opinions differ on the clamp quality.
AI-generated from the text of customer reviews
Mike B. –
Work great and cost effective
These fence clamps are terrific. I can use them to hold a sacrificial fence on my table saw, and I also use them to attach my Bow fence extender to my original table saw fence. They are easy to set up and use. They have a lot of adjustable room and they are solid. Best of all is the pad on the clamping head so this won’t damage the saw fence. They are less expensive than other brands too. I am very happy with these and I would buy them again.
Mark –
Great product
Great quality, the quality is top-notch. It’s exactly what I was looking for and more. Couldn’t be happier with this purchase!
M. Hocker –
Could use additional manufacturing change
Bought to hold a 1″ thick wood board to a table saw fence. The board sits against the fence, and the Milescraft fenceclamp inserts into holes in the top of the board and clamps to the fence.Adjustability is good, plenty of adjustment range from the end threaded angle rod and the adjustment thumbscrew component. Should work with most fences.What was disappointing is that the angle rod is about 91-92 degrees (obtuse)– so that when inserted in a 3/8″ drill hole in the wooden board and tightened, the board is tight at the top of the fence and has a gap at the bottom [the board was jointed and planed, with the holes drilled using a drill press, so the board and holes are accurate]. A proper design is to be slightly acute (88-89 degrees) so that tightening flattens the angle rod against the wood. I had to add a few turns of aluminum tape around the end of the angled rod, making the end “thicker” and the angle “smaller”, to make up for the too large angle, allowing the clamp to press the wood against the fence properly (flat).This slight angle issue might not be a problem for many applications, but is not acceptable for holding a board to a fence. The manufacturing process needs to be changed to correct the angle of the “90 degree” threaded rod to be acute 88-89 after stress relieving. My observation on the angle is not a one-off, I have 4 of these Milescraft clamps and they are all the same obtuse angle– good consistent manufacturing at least.For other reasons I eventually changed to 46″ Bow XTENDER and MATCHFIT/Microjig clamp– a far more costly option.
Upstate Will –
Pleased
Great product. Sturdy.
Scott Rooks Headland, Alabama –
They work fine for me.
I am not sure what the negative reviews are about. These are affordable, and do exactly what I need them to do. I use them in two different applications. First, I occasionally need to clamp a spacer block to my table saw fence for gauging repeat cuts (so the scrap piece doesn’t bind between the fence and saw blade). This is quick and easy to install and remove.Second, although they are a tight fit, I can use them to clamp my Bessey right angle corner clamps to my work table. I don’t have any problems some of the other critical reviewers complain about.
Fixitplease –
Very helpful clamp for table saw and other applications!
Though I have not had these to use for very long, they appear to be made well and are great for clamping to table saw guides as well as items like feather boards, frames, etc. Will buy more to keep in my shop!
satisfied customer –
Many uses for this product
Strong, easy to use and good quality. I use it on my table saw fence for different holding purposes.
Stubbie –
Hook is straiter than my other ones
Only a slight angle on the rod where my “black” one is a little too much. I use them for my sacrificial table saw fence. They work just like you expect.
LX2022 –
Bom produto. Atendeu minha necessidade.
jose de jesus arredondo –
EnvÃo rápido
Josh –
Really handy for the wood worker wanting to up their game.
les –
They are clamps nothing else to say
ewald –
Verwende sie als Helfer in der Werkstatt, um rechtwinkelige Verschraubungen oder Verleimungen durchführen zu können. Mit den parallel dazu errichteten Winkelspannhilfen und diesen Anschlagklemmen habe ich tolle Helferlein für meine Tätigkeiten in der Werkstatt gefunden.